Flame Arrester

Approx. Rs 5,999 / PieceGet Latest Price

• Type: Deflagration Flame Arrestor (Inline / End-of-Line)

• Sizes Available: ½" to 12" (15 mm to 300 mm)

• Body Material Options: Carbon Steel, SS304, SS316, Aluminum Alloy

• Flame Element Material: SS304 / SS316 Crimped Ribbon or Sintered Mesh

• End Connections:

  •  Flanged (ASME B16.5 / DIN)

  • Threaded (BSP/NPT)

  •  Welded Ends (Optional)

• Max Operating Pressure: Up to 1.2 bar

• Temperature Range: -20°C to +200°C

• Flow Capacity: High-flow, low-pressure drop design

 Suggested Image: Close-up of a flame arrestor unit installed in a pipeline with labeled components.

•  Deflagration Protection: Prevents the spread of low-speed flames (deflagration) in pipelines, vents, and tanks

•  High Flow Capacity: Ensures minimal pressure drop during normal flow

•  Safety First: Reliable protection against fire and explosion hazards

•  Replaceable Flame Element: Easy to replace and maintain for long service life

•  Weatherproof & Corrosion-Resistant: Suitable for outdoor use in harsh environments

•  Easy Installation: Can be mounted vertically or horizontally depending on your system design

 Suggested Image: Cross-section diagram of the flame arrestor, showing flame quenching elements (e.g., crimped ribbon, sintered mesh).

• ✔️ Compliant with EN ISO 16852 for flame arrestor design and performance

• ✔️ Certified to ATEX Directive 2014/34/EU for hazardous area use (Zone 1 & Zone 2)

• ✔️ Fully factory-tested for leak tightness, pressure, and flame quenching

• ✔️ Supplied with full Material Test Certificates (MTC), compliance documentation, and test reports

• ✔️ Available in CE, PESO, and other certifications (where applicable)

 Suggested Image: Certification logos like CE, ATEX, ISO, and PESO, with a close-up of test certificates or inspection reports.

Ideal for use in:

•  Petrochemical & Refinery Storage Tanks

• Biogas Digesters & Vent Lines

•  Fuel Loading/Unloading Systems

•  Pharmaceutical Solvent Recovery

•  CNG/LPG Plants & Transport Systems.

Additional Information:

Approx. Rs 7,999 / PieceGet Latest Price

Description
An In-Line Flame Arrestor is a safety device designed to prevent the propagation of flames in pipelines carrying flammable gases or vapors. It is installed directly in-line with piping systems to quench flame fronts and prevent explosions. The arrestor allows the passage of gases while stopping flame travel through a specially engineered flame element. Widely used in industries dealing with volatile substances such as petrochemicals, refineries, gas storage, and processing plants.

Technical Specifications

• Type: Bidirectional In-Line Flame Arrestor

• Body Material:

  • Carbon Steel

  • Stainless Steel (SS304 / SS316)

  • Aluminum (for light-duty applications)

• Flame Element:

  • Corrugated Stainless Steel Crimped Ribbon or Sintered Metal Disc

• Size Range: ½” to 24” (DN15 to DN600)

• Connection Type:

  • Flanged (ASME/ANSI B16.5)

  • Threaded (BSP/NPT)

  • Welded Ends

• Operating Pressure: Up to 10 bar

• Temperature Range: -20°C to +200°C (special versions up to +400°C)

• Element Replacement: Removable cartridge for easy maintenance

• Mounting Orientation: Horizontal or vertical

Key Features

• Flame Arresting Element: Stops flame propagation through high thermal conductivity and precision spacing

• High Flow Design: Low pressure drop for efficient gas or vapor transfer

• Bidirectional Flame Protection: Works in both flow directions

• Corrosion-Resistant: Suitable for harsh or corrosive environments

• Maintenance Friendly: Easy access to flame cell for inspection and cleaning

• Tested & Certified: Units tested to international safety standards

Applications

• Fuel gas and vapor pipelines

• Storage tank vent lines

• Bio-gas and flare systems

• Solvent recovery systems

• Chemical and petrochemical plants

• Wastewater treatment off-gas lines

Standards & Compliance

• Complies with API 2000 / ISO 16852

• Tested to EN 12874 or equivalent flame arrestor standards

• ATEX, CE, and PESO certified (on request)

• Supplied with inspection and test certificates

Additional Information:

Approx. Rs 7,999 / PieceGet Latest Price

Ensure unmatched safety and explosion protection in high-risk environments with our Detonation Flame Arrestors. Engineered to stop high-velocity flame fronts resulting from detonations, these arrestors are essential for pipelines, storage tanks, and vent lines carrying flammable gases and vapors.

Tested to the highest international standards, our arrestors provide peace of mind in even the most hazardous environments.

 Suggested Image: Product photo of detonation flame arrestor with flanged ends, installed on a gas pipeline.

•  Detonation Protection: Designed to stop supersonic flame fronts and shock waves from detonations

•  Bi-directional Function: Halts flame propagation from either direction in a pipeline

•  Robust Flame Element: Multi-layer stainless steel crimped ribbon for maximum flame quenching

•  Modular Construction: Easy to disassemble and clean without removing the arrestor from the line

•  Corrosion-Resistant Housing: Ideal for outdoor and harsh environments

•  Horizontal / Vertical Installation: Flexible to suit layout constraints

•  Factory Tested: Flame arresting and pressure tested for reliable operation

 Suggested Image: Cutaway diagram showing layers of crimped ribbon mesh and flame path inside the arrestor.

• ✔️ Tested and certified to EN ISO 16852, ATEX Directive 2014/34/EU

• ✔️ Complies with NFPA 69, API 2000, and PED requirements

• ✔️ Supplied with Material Test Certificate (MTC), inspection reports, and CE marking

• ✔️ Suitable for use in Zone 0, 1, and 2 hazardous areas

 Suggested Image: Certification icons (CE, ATEX, ISO), image of nameplate showing tag number and pressure rating.

Ideal for explosion prevention in:

•  Oil & Gas Pipelines

•  Chemical & Petrochemical Plants

•  Biogas & Landfill Gas Systems

• Pharmaceutical & Fine Chemical Processes

• Fuel Storage & Tank Vents

• Power Generation Facilities.

Additional Information:

Approx. Rs 5,499 / PieceGet Latest Price

Ensure maximum system safety with our Stainless Steel Inline Flame Arrestors, designed to prevent flame propagation in pipelines handling flammable gases and vapors. Built for high-performance in demanding industrial environments, these arrestors act as a critical safety barrier by quenching flames and stopping combustion fronts—without compromising flow efficiency.

• Type: Inline Flame Arrestor

• Body Material: SS304 / SS316 (Standard)

• Element Material: Stainless Steel Crimped Ribbon / Sintered Mesh / Wound Strip

• Sizes Available: ½" to 12" (15 mm to 300 mm)

• End Connections:

  •  Flanged (ASME / DIN / JIS)

  •  Threaded (BSP / NPT)

  •  Welded Ends (on request)

• Flow Direction: Bidirectional / Unidirectional (as specified)

• Operating Pressure: Up to 20 bar

• Temperature Range: -20°C to +200°C (higher options on request)

• Testing & Certification: Flashback Arrestor Tested, ATEX / CE Certified

• Maintenance: Cleanable and Serviceable Core Element

 Suggested Image: Inline flame arrestor installed in a pipeline, with flame path diagram overlay.

• Stops Flame Propagation
  Quenches and extinguishes flame fronts from explosive mixtures

•  Minimal Pressure Drop
  Optimized internal core design ensures low flow resistance

•  Bidirectional Flame Protection
  Optional models provide flame arrestor function in both directions

•  Removable Core Element
  Easy to maintain and clean, reducing long-term operating cost

•  All Stainless Steel Construction
  Corrosion-resistant body and internals for long service life in harsh environments

•  Compact Inline Design
  Space-saving solution for pipelines, vents, or tank connections

 Suggested Image: Cross-sectional view showing layered flame arrestor element inside SS body.

• ✔️ Conforms to ATEX Directive, API 2000, and ISO 16852

• ✔️ Type-tested for flame arresting in accordance with recognized international safety norms

• ✔️ Supplied with Material Test Certificates (MTC) and performance documentation

• ✔️ CE Marked (on applicable models)

 Suggested Image: CE label and testing certificates attached to the flame arrestor unit.

• Chemical & Petrochemical Facilities

• Fuel Storage Terminals & Tank Vents

• Marine Vapor Control Systems

• Laboratory Gas Systems & Fume Extractions

• Hydrogen, Methane, and Flammable Gas Pipelines

• Explosion Protection for Vents & Process Lines.

Additional Information:

Approx. Rs 5,599 / PieceGet Latest Price

Description

An Inline Flame Arrestor is a safety device designed to prevent the propagation of flame in gas or vapor systems. Installed directly in pipelines, these units stop the flame front resulting from deflagration or detonation, protecting downstream equipment, storage tanks, and personnel. Inline flame arrestors are essential in industries handling flammable gases or vapors.

• Type:
  Bidirectional Inline Flame Arrestor

• Working Principle:
  Stops flame by dissipating heat through a specially designed flame element (corrugated or crimped metal).

• Element Type:
  Stainless Steel Crimped Ribbon/Wound Strip

• Size Range:
  ½" to 12" (DN15 to DN300)

• Material of Construction:

  • Body: Carbon Steel, SS304, SS316

  • Flame Element: SS304 / SS316

• End Connections:

  • Flanged (ASME B16.5 / DIN / JIS)

  • Threaded (BSP/NPT)

  • Welded (on request)

• Operating Pressure:
  Up to 15 bar

• Operating Temperature:
  -20°C to +200°C (standard)

  • High-temp designs available up to 400°C

• Flame Arresting Element
  Precision-engineered metal core cools and quenches flame fronts.

• Bidirectional Flame Protection
  Stops flame propagation in both directions.

• Low Pressure Drop Design
  Maintains system efficiency with minimal flow resistance.

• Easy Maintenance
  Element can be removed and cleaned without removing the unit from the line.

• Rugged, Corrosion-Resistant Body
  Suitable for outdoor and hazardous environments.

• Explosion-Proof Protection
  Prevents ignition of flammable vapor-air mixtures in upstream or downstream piping.

• Petroleum & Gasoline Storage Facilities

• Chemical and Petrochemical Plants

• Hydrogen and Biogas Pipelines

• Solvent Recovery Systems

• Vent Lines in Flammable Gas Systems

• Pharmaceutical and Paint Processing Units

• API 2000 / ISO 16852 compliant

• ATEX, CE marked (if applicable)

• Third-party testing and certification available

• Supplied with Material Test Certificates (MTC) and inspection documents

Additional Information:

Approx. Rs 8,999 / PieceGet Latest Price

The In-Line Flame Arrestor is a critical safety device designed to stop the propagation of flame in pipelines carrying flammable gases or vapors. It allows for free flow of gases while preventing flame transmission, providing protection for storage tanks, pipelines, and processing equipment in hazardous environments. This type of flame arrestor is installed directly in the pipeline, offering compact, in-line safety without compromising process efficiency.

• Flame Arresting Core: Designed to extinguish flame by absorbing heat below ignition temperature.

• Bidirectional Operation: Prevents flame travel in both directions (suitable for backfire and flashback protection).

• Modular & Serviceable: Core elements can be removed for cleaning and inspection.

• Durable Construction: Made for continuous operation in demanding process conditions.

• Compact & Efficient: Minimal pressure drop with optimized flame barrier design.

• End-of-Line Flame Arrestor

• In-Line Deflagration Arrestor

• Detonation Arrestor (High-Velocity)

• Vent Line Arrestors

• Custom Inline Units for Special Applications

• Storage tank vent lines and vapor recovery systems

• Hydrogen and bio-gas lines in energy and waste facilities

• Solvent and chemical processing systems

• Petroleum and natural gas pipelines

• Flammable gas piping in pharmaceutical and food industries

• Paint booths and hazardous zone exhaust systems

Additional Information: